Model: VC101 3 1/2 Self-calibration Digital Multimeter
Full overload protection, Protective holster (rubber boot), auto power off, data hold
Frequency measurement up to 20MHz, square wave output
Display: digit is 25mm high, 1999 counts
DC voltage: 200m/2/20/200V ± 0.5%, 600V ± 0.8%
AC voltage: 200m/2/20/200V ± 1.0%, 600V ± 1.2%
DC current: 200µ/2m/20m/200mA ± 1.0%, 10A ± 1.2%
AC current: 200µ/2m/20m/200mA ± 1.2%, 10A ± 1.5%
Resistance: 200/2k/20k/200k/2MΩ ± 0.8%, 20MΩ ± 1.2%
Capacitance: 20n/200n/20µF ± 4.0%
Frequency: 20k/20MHz ± 0.1%
Square wave: l kHz ± 0.1%
Diode check: test current 1mA, test voltage 3V
Continuity test (audible): buzzer below 6Ω, open voltage 3V
Power source: 6F22 (9V) x 1
Size: 155 x 90 x 48mm
Weight: Approx. 270g (including battery)